EPOTAINER ZINC 60 环氧富锌底漆60 属富锌底漆，环氧漆体系。50E enclosures. 用于严酷腐蚀环境的钢结构表面。and zinc powder. 厚涂型环氧富锌防腐漆，由环氧树脂、聚酰胺及锌粉组成。本页参数：干膜厚度 30-80 微米/道、理论涂布率 0.043 千克/平方米/10 微米、组份数 双组份。同品牌同类可对比：EPOFEND ZINC 60 环氧富锌底漆60、AMEINCOAT ZINC PRIMER、EPOFEND GLASS 30 环氧玻璃鳞片漆30。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 67% |
|---|---|
| 干膜厚度 | 30-80 微米/道 |
| 理论涂布率 | 0.043 千克/平方米 /10 微米 |
| VOC | 254g/L,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| 密度/比重 | — |
| 组份数 | 双组份 |
| 闪点 | 18℃ |
| 稀释剂 | 环氧漆稀释剂 |
| 混合比 | Base/Hardener=19/1(by weight) |
| EPOTAINER ZINC 60 | 环氧富锌底漆60 |
|---|
A high-build organic zinc rich anti-corrosive coating based on epoxy resin, polyamide hardener
and zinc powder.
厚涂型环氧富锌防腐漆,由环氧树脂、聚酰胺及锌粉组成。
For steel structure at severe corrosive environment. Outdoor Corrosion Resistant suitable for UL
50E enclosures.
用于严酷腐蚀环境的钢结构表面。可用作UL50E 外壳户外防腐。
Complies with ISO 12944-5、SSPC PAINT 20、HG/T 3668-2009,UL50E certified
符合ISO 12944-5、SSPC PAINT 20、HG/T 3668-2009 富锌底漆中的成分要求。
通过UL50E 认证
Excellent rust preventive property
极好的防腐性能
High build applicability
厚涂施工性
Excellent resistance to abrasions and impacts
极好的耐磨损、耐冲击性能
Long term protection when used with epoxy coatings
与环氧涂料配套时可提供长期的保护
Lead free*, be friendly with health and environment
无铅,有益于健康和环境
*:Lead free is defined in order to comply with the request of JIS K 5674
*:无铅的概念为满足JIS K 5674 中对铅含量的要求
| Color | Grey |
|---|---|
| 颜色 | 灰色 |
| Gloss | Matt |
| 光泽 | 无光 |
| Volume solids 体积固体份 | 67% |
| VOC | 254g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| 挥发性有机化合物含量 | 254g/L,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| Flash Point 闪点 | 18℃ |
| Film thickness | Dry30-80 microns/coat Wet : 45-120microns/coat |
| 涂装膜厚 | 干膜: 30-80 微米/道湿膜:45-120 微米/道 |
| Theoretical Coverage | 0.043kg/m²/10 microns |
| 理论涂布率 | 0.043 千克/平方米/10 微米 |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂布率与表面处理, 外界环境, 施工方法等多种因素有关。
| Application Temperature 施工温度 | 5℃-40℃ |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| 混合 | 混合主剂与固化剂,使用动力工具搅拌均匀 |
| Mixing Ratio | Base/Hardener=19/1(by weight) |
| 混合比例 | 主剂/固化剂=19/1(重量比) |
| Pot Life | 5℃ | 10℃ | 20℃ | 30℃ |
| 混合使用期 | 16hrs | 12hrs | 8hrs | 6hrs |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| 施工方法 | 无气喷涂、空气喷涂、刷涂、滚涂 Airless spray 无气喷涂 |
| Nozzle tip | 喷嘴尺寸 | 0.43mm-0.53mm |
| Nozzle pressure | 出口压力 | ≥15Mpa |
| Thinning ratio | 稀释比率 | 0-10% by weight(重量比) |
Brush/Roller 刷涂、滚涂 Thinning ratio 稀释比率 0-10% by weight(重量比)
| Thinner | Epomarine Thinner |
|---|---|
| 稀释剂 | 环氧漆稀释剂 |
| Drying time & Overcoating interval | Drying time & Surface dry | Drying time & 指触干燥 | 10℃ 30mins | 20℃ 20mins | 30℃ 10mins |
| 干燥时间&涂装间隔 | Touch dry | 半硬干燥 | 6hrs | 3hrs | 1hr |
| Min. interval | 最小涂装间隔 | 5hrs | 2hrs | 1hr | |
| Max. interval | 最大涂装间隔 |
| Applied Substrates | Bare steel |
|---|---|
| 适用底材 | 裸钢 |
| Typical topcoat | EPOTAINER EX-600,EPOTAINER EX(M) or according to the coating system of Cosco Kansai. |
| 适用上涂 | 环氧漆EX-600,环氧云铁厚浆漆EX(M)或参考我司涂装配套 |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所 能控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺 的不断发展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品 使用前,请确认所持说明书为最新版本。
| Issued Date | 2023/09 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI EPOTAINER ZINC 60 环氧富锌底漆60 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
