NIPPON A-MARINE FINISH H 属面漆。(GB 38469 2019) issued by People's Republic of China.本页参数：体积固体份 50 ± 2%、干膜厚度 30-50 μm、理论涂布率 14.29 m²/L。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 50 ± 2% |
|---|---|
| 干膜厚度 | 30-50 μm |
| 理论涂布率 | 14.29 m²/L (35 μm) |
| VOC | 448 g / L |
| 密度/比重 | — |
| 组份数 | — |
| 闪点 | 32℃ |
| 稀释剂 | NIPPON MARINE THINNER 200 |
| 颜色/外观 | Other colors |
| NIPPON | A-MARINE |
|---|---|
| FINISH | H A high solid acrylic based finish with good weathering resistance and workability. |
| It | satisfies regulation value in the "Limit of harmful substances of marine coatings" |
(GB 38469 2019) issued by People's Republic of China.
Finish for boottop, topsides, decks, superstructures, etc.
| Type | Acrylic White, Black, 445 Red Oxide, Gray*, Cream*, Blue*, Green*, |
|---|---|
| Color | Other colors |
(see Note 3)
| Gloss | Semi-gloss |
|---|---|
| Volume Solids | 50 ± 2% (ISO3233:1998) |
| Typical Dry Film Thickness | 30 ~ 50 μm |
| Approx. Wet Film Thickness | 60 ~ 100 μm |
| Theoretical Coverage | 14.29 m²/ L (35 μm) |
as supplied
| Drying Time | Surface Dry | 40 minutes (5℃) | 20 minutes (20℃) | 15 minutes (30℃) |
| Dry Hard | 2 hours (5℃) | 1 hour (20℃) | 30 minutes (30℃) | |
| Interval before Overcoating | Min. | 6 hours (5℃) | 3 hours (20℃) | 2 hours (30℃) |
| ( by self ) | Max. | ― (5℃) | ― (20℃) | ― (30℃) |
| VOC Values | 448 g / L |
| Thinner | NIPPON MARINE THINNER 200 |
|---|
Airless Spray
| Tip range | 0.43 ~ 0.48 mm |
|---|---|
| Fan angle | 55 ~ 69° |
| Output pressure | 100 ~ 150 kg / cm² |
| Brush | For touching up small areas only |
| Package | 20L |
| Japan Local Brand | NIPPON A-MARINE FINISH H |
| Flash Point | 32℃ |
All surfaces to be coated should be clean, dry and free from contamination.
High pressure fresh water wash and remove all oil / grease, soluble contaminants and other foreign matters.
Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Proper ventilation and protective measures must be provided during applications and drying period to keep solvent vapor concentrations within safe limits.
Prior to use, obtain, consult and follow the SDS for this product concerning health and safety information.
1)The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.
2)Use NIPPON MARINE THINNER 200 to wash painting appliances, hoses and guns before and after use.
3) Chlorinated rubber paints should not be applied on top of A-marine finish.
4) The following colours are available as our standard.
| Gray | 070, 065, 060, 055, 050, 040 |
|---|---|
| Cream | 332, 335 |
| Blue | 606, 808, 837 |
| Green : | 442, 505, 535, 225 5) For availability of product consult Nippon Paint Marine representatives. |
6) Unit size and filled volumes can vary due to local regulations.
7) Store the paints in paint store.
8) The coating film may soften when exposed to heat sources such as direct sunlight, due to the general thermoplasticity of acrylic resin. This can result in surface stickiness, visible footprints, or dust accumulation on the coating surface. Allow the coating to recover naturally as it cools.
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 立邦船舶 NIPPON MARINE NIPPON A-MARINE FINISH H 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
