TANKCARE NS-30 无溶剂环氧涂料NS-30 属环氧漆。waterballast tank and interior of pipe 作为底面合一涂料用于淡水舱、饮用水舱、压载舱及管道内部等部位。A two component, solvent free epoxy paint。本页参数：体积固体份 100 ± 2%、干膜厚度 200-400 微米/道、理论涂布率 5.0 平方米/升。同品牌同类可对比：EPOFEND AR 80 超强耐磨环氧厚浆漆、EPOFEND AR 耐磨环氧漆、EPOFEND MT-30 特种环氧漆MT-30。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 100 ± 2% |
|---|---|
| 干膜厚度 | 200-400 微米/道 |
| 理论涂布率 | 5.0 平方米/升 /200μm |
| VOC | — |
| 密度/比重 | — |
| 组份数 | 双组份 |
| 闪点 | 100℃以上 |
| 稀释剂 | Epomarine Thinner #20 (Only for Was… |
| 混合比 | Base/Hardener=2.3/1(by weight) |
| TANKCARE NS-30 | 无溶剂环氧涂料 NS-30 |
|---|
A two component, solvent free epoxy paint
双组份无溶剂环氧涂料
As a protective primer-finish coat can be used in freshwater tanks, potable water tanks,
waterballast tank and interior of pipe
作为底面合一涂料用于淡水舱、饮用水舱、压载舱及管道内部等部位。
Complies with HG/T 4337-2012, GB/T 31361-2015
符合HG/T 4337-2012《钢制输水管道无溶剂液体环氧涂料》,符合GB/T 31361-2015《无 溶剂环氧液体涂料的防腐蚀涂装》
Excellent freshwater and corrosive resistance
极好的耐淡水性和耐腐蚀性
Excellent high-build applicability
极好的厚涂施工性能
Tough and strong film
漆膜坚韧强硬,具有极好的耐磨损性
Excellent durability against cured oils, sea water and chemical product
优秀的耐原油性、耐海水性、耐化学品性
| Color | White |
|---|---|
| 颜色 | 白色 |
| Volume Solids 体积固体份 | 100±2% |
| Flash Point | Greater than 100℃ |
| 闪点 | 100℃以上 |
| Film thickness | Dry 200 -400microns/coat Wet : 200-400microns/coat |
| 涂装膜厚 | 干膜: 200-400 微米/道湿膜: 200-400 微米/道 |
| Theoretical Coverage | 5.0 m2/Ltr/200 microns |
| 理论涂覆率 | 5.0 平方米/升/200μm |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂覆率与表面处理, 外界环境, 施工方法等多种因素有关。
| Application Temperature 施工温度 | 5℃-40℃ |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| 混合 | 混合主剂与固化剂,使用动力工具搅拌均匀 |
| Mixing Ratio | Base/Hardener=2.3/1(by weight) |
| 混合比例 | 主剂/固化剂=2.3/1(重量比) |
| Pot life 混合使用期 | 10℃ | 20℃ | 30℃ |
| Application Methods | 90mins | 60mins | 40mins |
| 施工方法 | Airless spray, Roller, Brush |
|---|
无气喷涂,滚涂,刷涂
Airless spray 无气喷涂
| Nozzle tip | 喷嘴尺寸 | 0.43mm-0.53mm |
| Nozzle pressure | 出口压力 | ≥15Mpa |
| Thinning ratio | 稀释比率 | 0% by volume(体积比) |
Roller 滚涂
Thinning ratio 稀释比率 0% by volume(体积比)
| Thinner 稀释剂 | Epomarine Thinner #20 (Only for Washing) |
|---|
环氧稀释剂#20(仅用于清洗设备)
| Drying time & Overcoating interval | Temperature | 温度 | 10℃ | 20℃ | 30℃ |
| 干燥时间&涂装间隔 | Surface dry | 指触干燥 | 12hrs | 6hrs | 4hrs |
| Touch dry | 半硬干燥 | 36hrs | 24hrs | 18hrs | |
| Before flooding | 耐浸干燥 | 20days | 14days | 10days | |
| Min. interval | 最小涂装间隔 | 36hrs | 24hrs | 18hrs | |
| Applied Substrate | Max. interval | 最大涂装间隔 | 5days | 3days | 2days |
| 适用下底材 | Bare steel |
|---|
裸钢
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。
| Shelf life | 12 months from date of production (25℃) |
|---|---|
| 贮存期限 | 自生产之日起12 个月(25℃) |
The information given on this sheet is to the best of our knowledge and accurate at the time of
issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所 能控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺 的不断发展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品 使用前,请确认所持说明书为最新版本。
| Issued Date 发行日期 | 2024/10 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI TANKCARE NS-30 无溶剂环氧涂料NS-30 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
