← 返回关西 KANSAI品牌页

TANKCARE AE-60 高固体耐油导静电漆AE-60

选型速览

TANKCARE AE-60 高固体耐油导静电漆AE-60 属环氧漆。crude oil and product oil. The surface resistivity is 107-109 ohms. 作为长效防护的导静电防腐涂料,使用于装载原油和成品油的钢制储罐内壁。是一种添加导静电材料的双组份胺加成物固化型环氧涂料。Lead < 100ppm 六价铬离子、钴、镉物质含量小于10ppm。本页参数:体积固体份 80 ± 2%、干膜厚度 100-200 微米/道、理论涂布率 0.186 千克/平方米/100 微米。

以上内容整理自原厂说明书与本站参数表;选型、配套与货期请联系我们确认。

体积固体份80 ± 2%
干膜厚度100-200 微米/道
理论涂布率0.186 千克/平方米 /100 微米
VOC217 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
密度/比重—
组份数双组份
闪点29℃以上
稀释剂环氧稀释剂
混合比Base/Hardener=8/1(by weight)

按分类浏览同类型号本型号属于:环氧漆

TANKCARE AE-60

TANKCARE AE-60高固体耐油导静电漆AE-60

PRODUCT DESCRIPTION

A two pack amine adduct cured epoxy paint with conducting electrostatic materials.

产品简介

是一种添加导静电材料的双组份胺加成物固化型环氧涂料。

RECOMMENDED USE

As long-term conducting electrostatic anti-corrosive coating on steel tank of interior surface for

用途

crude oil and product oil. The surface resistivity is 107-109 ohms.

作为长效防护的导静电防腐涂料,使用于装载原油和成品油的钢制储罐内壁。表面电阻率 为107-109 欧姆。

COMPLIED STANDARDS

Complies with GB 50393-2008

符合标准

符合液体石油产品静电安全规程GB 50393-2008

FEATURES

Excellent corrosive resistance

产品特性

极好的防腐性能

a long-term stable conducting electrostatic properties

长效的导静电性能

Excellent osmosis resistance

优异的抗渗透性

Non-pollution for oil

对油品无污染

Light colors

浅色

Free from arsenic, cyanide, mercury, selenium, and metallic aluminum pigments

不含有砷、氰、汞、硒、金属铝颜料;

Hexavalent chromium ions < 10ppm; Cobalt < 10ppm; Cadmium < 10ppm;

Lead < 100ppm

六价铬离子、钴、镉物质含量小于10ppm;铅含量小于100ppm

PHYSICAL PROPERTIES

基本数据

ColorGrey
颜色灰色
Volume Solids 体积固体份80±2%
VOC217g/L,accord with EU Dircrtive2004/42/EC,subcategory j
挥发性有机化合物含量217 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
Flash PointGreater than 29℃
闪点29℃以上
Film thicknessDry : 100-200μm/coatWet :125-250 μm/coat
涂装膜厚干膜: 100-200 微米/道湿膜:125-250 微米/道
Theoretical Coverage0.186Kg/m2/100 microns
理论涂覆率0.186 千克/平方米/100 微米

Practical coverage depending on surface conditions, environment, applications, etc.

实际涂覆率与表面处理, 外界环境, 施工方法等多种因素有关。

APPLICATION

施工

TANKCARE AE-60

Application Temperature 施工温度5℃-40℃
MixingCombine Base with Hardener, mix thoroughly with power agitator
混合混合主剂与固化剂,使用动力工具搅拌均匀
Mixing RatioBase/Hardener=8/1(by weight)
混合比例主剂/固化剂=8/1(质量比)
Pot life5℃10℃20℃30℃
混合使用期4 hrs3hrs2hrs1hrs
Application MethodsAirless spray, air spray and roller
施工方法无气喷涂、空气喷涂、滚涂 Airless spray 无气喷涂
Nozzle tip喷嘴尺寸0.33mm-0.43mm
Nozzle pressure出口压力≥10Mpa
ThinnerEpomarine Thinner
稀释剂环氧稀释剂
Drying time &Temperature温度5℃10℃20℃30℃
Overcoating intervalSurface dry指触干燥24hrs16hrs10hrs
干燥时间&涂装间隔Touch dry半硬干燥48hrs24hrs16hrs
Min. interval最小涂装间隔48hrs24hrs
Max. interval最大涂装间隔
Applied substrateBare steel
适用底材裸钢
Typical topcoatTankcare AE-60 paint or according to the coating system of Cosco Kansai.
适用上涂耐油导静电涂料,或参考我司涂装配套

STORAGE

Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept

贮存

tightly closed.

贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。

Shelf life12 months from date of production (25℃)
贮存期限自生产之日起12 个月(25℃)

DISCLAIMER

The information given on this sheet is to the best of our knowledge and accurate at the time of

提请注意

issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.

本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所 能控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺 的不断发展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品 使用前,请确认所持说明书为最新版本。

Issued Date 发行日期2025/08

资料以厂商最新版为准,具体以原厂最新 TDS 为准。查看 关西 KANSAI TANKCARE AE-60 高固体耐油导静电漆AE-60 原厂 PDF 说明书全文。

同品牌相近型号 · 环氧漆

查看 关西 KANSAI 全部型号

采购与资料

原厂包装规格与批次交期以实际供货为准,可联系我们按项目核算。