Silico Tect AC-30 Topcoat 聚硅氧烷面漆AC-30 属面漆。maintenance finish for bridges and port machinery etc. 用于新建设施或作为维修保养面漆使用，用于桥梁、港口机械等重防腐设施。surfaces of heavy-duty. 用于重防腐金属表面的高光泽高性能丙烯酸改性聚硅氧烷面漆。本页参数：体积固体份 70% ± 2%、干膜厚度 25-100 微米/道、理论涂布率 17.5 平方米/升。同品牌同类可对比：AMEINCOAT INT、AMEINCOAT RC TOPCOAT、EPOMARINE AE-10 TOPCOAT 耐油导静电面漆。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 70% ± 2% |
|---|---|
| 干膜厚度 | 25-100 微米/道 |
| 理论涂布率 | 17.5 平方米/升 /40μm |
| VOC | 319g/L,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| 密度/比重 | — |
| 组份数 | 双组份 |
| 闪点 | 34℃以上 |
| 稀释剂 | 专用稀释剂 |
| 混合比 | Base/Hardener=12/1(by weight) |
| Silico Tect AC-30 | 聚硅氧烷面漆AC-30 |
|---|
A high gloss durable finish based on acrylic modified polysiloxane for steel
surfaces of heavy-duty.
用于重防腐金属表面的高光泽高性能丙烯酸改性聚硅氧烷面漆。
As a finish can be used in new construction situations and as industrial
maintenance finish for bridges and port machinery etc.
用于新建设施或作为维修保养面漆使用,用于桥梁、港口机械等重防腐设施。
Complies with JT/T 722-2008, HG/T 4755-2014
符合公路桥梁钢结构防腐涂装技术条件JT/T 722-2008,符合 HG/T 4755-2014 《聚硅氧烷涂料》标准
Outstanding weathering resistance
优异的耐候性
Outstanding gloss and color retention for long time
优异的长期保色和保光性
Outstanding resistance to impact and abrasion
优秀的的耐冲击和耐磨损性能
Good adhesion to epoxy primers and steel surface
对环氧底漆有极好的的附着力
Excellent resistance to chemical and oil
极好的耐油和耐化学药品性
Isocyanate free
不含异氰酸酯
| Color | White and Colors |
|---|---|
| 颜色 | 白色及各色 |
| Gloss | High Gloss |
| 光泽 | 高光 |
| Volume Solids 体积固体份 | 70%±2% |
| VOC | 319g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| 挥发性有机化合物含量 | 319g/L,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| Flash Point | Greater than 34℃ |
| 闪点 | 34℃以上 |
| Film thickness | Dry :25-100microns/coat Wet : 35~143microns/coat |
| 涂装膜厚 | 干膜:25~100 微米/道湿膜: 35-143 微米/道 |
| Theoretical Coverage | 17.5 m2/Ltr/40 microns |
| 理论涂布率 | 17.5 平方米/升/40μm |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂布率与表面处理, 外界环境, 施工方法等多种因素有关。
| Application Temperature 施工温度 | 5℃-35℃ |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| 混合 | 混合主剂与固化剂,使用动力工具搅拌均匀 |
| Mixing Ratio | Base/Hardener=12/1(by weight) |
| 混合比例 | 主剂/固化剂=12/1(质量比) |
| Pot Life | 5℃ | 10℃ | 20℃ | 30℃ |
| 混合使用期 | 3.5hrs | 3hrs | 2hrs | |
| Application Methods | Airless spray, air spray, brush and roller |
|---|---|
| 施工方法 | 无气喷涂、空气喷涂、刷涂、滚涂 Airless spray 无气喷涂 |
| Nozzle tip | 喷嘴尺寸 | 0.33mm-0.43mm |
| Nozzle pressure | 出口压力 | ≥10Mpa |
| Thinning ratio | 稀释比率 | 0-10% by weight(重量比) |
Brush/Roller 刷涂、滚涂 Thinning ratio 稀释比率 0-10% by weight(重量比)
| Thinner | Special Thinner |
|---|---|
| 稀释剂 | 专用稀释剂 |
| Drying time & | Temperature | 温度 | 5℃ | 10℃ | 20℃ | 30℃ |
| Overcoating interval | Surface dry | 指触干燥 | 4hrs | 3hrs | 2hr | 1.5hr |
| 干燥时间&涂装间隔 | Touch dry | 半硬干燥 | 24hrs | 18hrs | 12hrs | |
| Min. interval | 最小涂装间隔 | 8hrs | 6rs | 4hrs | 3hrs | |
| Max. interval | 最大涂装间隔 | - | ||||
| Typical undercoat | Epotect EX ,Universal EP-60 or according to the coating systems of Cosco Kansai |
|---|---|
| 适用下涂 | Epotect EX ,Universal EP-60 或参考我司推荐配套 |
| Typical topcoat | Silico Tect AC-30 or according to the coating systems of Cosco Kansai |
| 适用上涂 | Silico Tect AC-30 或参考我司推荐配套 |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。
| Shelf life | 12 months from date of production (25℃). It must be used immediately, once |
|---|---|
| 贮存期限 | open. |
自生产之日起12 个月(25℃),开桶后必须立刻使用
The information given on this sheet is to the best of our knowledge and accurate at
the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条 件非我方所能控制,此中信息不含担保,即仅在选取产品上对买方负责。由 于我公司产品及生产工艺的不断发展,本说明书的内容也会随时进行更改, 此中所有信息均以我方确认为主。产品使用前,请确认所持说明书为最新版 本。
| Issued Date 发行日期 | 2023/01 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI Silico Tect AC-30 Topcoat 聚硅氧烷面漆AC-30 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
