SILANE AC硅烷浸渍处理剂 属辅料。在底漆施工前，封闭清洁的混凝土或水泥表面。High purity Isobutyl triethoxy silane.极好的渗透性 Excellent adherence with concrete 极好的附着性 Excellent effect of dryness 良好的干燥性 Excellent durability against chlorine ion, ultraviolet rays 优异的耐氯离子性、耐紫外线性 Excellent ability of reducing water absorption 优异的降低吸水率性。本页参数：理论涂布率 0.25-0.3 升/平方米、组份数 单组份。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | — |
|---|---|
| 干膜厚度 | — |
| 理论涂布率 | 0.25-0.3 升/平方米 |
| VOC | — |
| 密度/比重 | — |
| 组份数 | 单组份 |
| 闪点 | 62℃以上 |
| 稀释剂 | Special Thinner 专用稀释剂(for clean) |
| 颜色/外观 | 透明 |
| SILANE AC | 硅烷浸渍处理剂 |
|---|
High purity Isobutyl triethoxy silane.
高纯度异丁基三乙氧基硅烷。
For saturation of well cleaned concrete or cement surfaces before application of primer.
在底漆施工前,封闭清洁的混凝土或水泥表面。
Complies with JTJ275-2000
JTJ275-2000 海港工程混凝土结构防腐蚀技术规范
Excellent penetration properties
极好的渗透性
Excellent adherence with concrete
极好的附着性
Excellent effect of dryness
良好的干燥性
Excellent durability against chlorine ion, ultraviolet rays
优异的耐氯离子性、耐紫外线性
Excellent ability of reducing water absorption
优异的降低吸水率性
| Color | Clear |
|---|---|
| 颜色 | 透明 |
| Purity | ≥98% |
| 纯度 | ≥98% |
| Flash Point | Greater than 62℃ |
| 闪点 | 62℃以上 |
| Theoretical Coverage | 0.25-0.3 升/平米 |
| 理论涂覆率 | 0.25-0.3 升/平方米 |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂覆率与表面处理, 外界环境, 施工方法等多种因素有关。
| Application Temperature 施工温度 | 5℃-40℃ |
|---|---|
| Mixing Ratio | One component |
| 混合比例 | 单组份 |
| Application Methods | Airless spray, air spray brush and roller |
| 施工方法 | 无气喷涂、空气喷涂、刷涂、滚涂 Airless spray 无气喷涂 |
| Nozzle tip | 喷嘴尺寸 | 0.21mm-0.23mm |
| Nozzle pressure | 出口压力 | ≥3Mpa |
| Thinning ratio | 稀释比率 | 0% by volume(体积比) |
Brush/Roller 刷涂、滚涂 Thinning ratio 稀释比率 0% by volume(体积比)
| Thinner 稀释剂 | Special Thinner 专用稀释剂(for clean) |
|---|
| Drying time & | Temperature | 温度 | 5℃ | 20℃ | 30℃ |
| Overcoating interval | Surface dry | 指触干燥 | 3hrs | 1hrs | 1hr |
| 干燥时间&涂装间隔 | Touch dry | 半硬干燥 | 4hrs | 2hrs | |
| Min. interval (for self) | 最小涂装间隔(自身覆涂) | 6hrs | 4hrs | ||
| Min. interval (for topcaot) | 最小涂装间隔(与上层覆涂) | 72hrs | 36hrs | 24hrs | |
| Max. interval | 最大涂装间隔 | ||||
| Applied substrate | Concrete, cement |
|---|---|
| 适用底材 | 混凝土,水泥 |
| Typical topcoat | Epomarine concrete primer and moisture-curing coat |
| 适用上涂 | 环氧水泥底漆、湿固化漆 |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。
| Shelf life | 12 months from date of production (25℃) |
|---|---|
| 贮存期限 | 自生产之日起12 个月(25℃) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所能控 制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺的不断发 展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品使用前,请确 认所持说明书为最新版本。
| Issued Date 发行日期 | 2025/04 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI SILANE AC硅烷浸渍处理剂 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
