FLON FINISH HS-50 属面漆。including offshore structures, wind towers and bridges. 用于严酷工业腐蚀环境的钢结构表面，包括海上钢结构、风力发电塔架、桥梁等作为面漆使用。isocyanate hardener. 氟树脂与非泛黄异氰酸酯固化的耐侯型氟树脂漆。极好的保光、保色性 Excellent adhesion to polyurethane and epoxy resin. 与聚氨酯和环氧底漆间具有极好的附着力。本页参数：体积固体份 66% ± 2%、干膜厚度 25-50 微米/道、理论涂布率 16.5 平方米/升。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 66% ± 2% |
|---|---|
| 干膜厚度 | 25-50 微米/道 |
| 理论涂布率 | 16.5 平方米/升 /40 微米 |
| VOC | 340 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| 密度/比重 | — |
| 组份数 | 双组份 |
| 闪点 | 26℃以上 |
| 稀释剂 | 氟碳面漆稀释剂 |
| 混合比 | Base/Hardener=10/1(by weight) |
| FLON FINISH HS-50 | 氟碳面漆HS-50 |
|---|
A weather resisting fluoro resin paint based on fluoro resin and non-yellowing
isocyanate hardener.
氟树脂与非泛黄异氰酸酯固化的耐侯型氟树脂漆
As a finish can be used in steel structure at industrial severe corrosive environments
including offshore structures, wind towers and bridges.
用于严酷工业腐蚀环境的钢结构表面,包括海上钢结构、风力发电塔架、桥梁等 作为面漆使用
Complies with JIS K 5659:2008, JT/T 722-2008, TB/T 1527-2004, HG/T 3792-2005
符合鋼構造物用耐候性塗料JIS K5659:2008、公路桥梁钢结构防腐涂装技术条件 JT/T 722-2008、铁路钢桥保护涂装TB/T 1527-2004、交联型氟树脂涂料HG/T 3792-2005 的要求
Excellent color and gloss retention.
极好的保光、保色性
Excellent adhesion to polyurethane and epoxy resin.
与聚氨酯和环氧底漆间具有极好的附着力
| Color | Colors |
|---|---|
| 颜色 | 各色 |
| Gloss | High gloss |
| 光泽 | 高光 |
| Volume Solids 体积固体份 | 66%±2% |
| VOC | 340g/L,accord with EU Dircrtive2004/42/EC, subcategory j |
| 挥发性有机化合物含量 | 340 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| Flash Point | Greater than 26℃ |
| 闪点 | 26℃以上 |
| Film thickness | Dry : 25-50μm/coat Wet : 38-76μm/coat |
| 涂装膜厚 | 干膜: 25-50 微米/道湿膜: 38-76 微米/道 |
| Theoretical Coverage | 16.5m2/L/40microns |
| 理论涂布率 | 16.5 平方米/升/40 微米 |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂覆率与表面处理,外界环境,施工方法等多种因素有关
| Application Temperature 施工温度 | 0℃-40℃ |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| 混合 | 混合主剂与固化剂,使用动力工具搅拌均匀 |
| Mixing Ratio | Base/Hardener=10/1(by weight) |
| 混合比例 | 主剂/固化剂=10/1(重量比) |
| Pot Life | 5℃ | 20℃ | 30℃ |
| 混合使用期 | 5hrs | 2hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| 施工方法 | 无气喷涂、空气喷涂、刷涂和滚涂 Airless spray 无气喷涂 |
| Nozzle tip | 喷嘴尺寸 | 0.33mm-0.43mm |
| Nozzle pressure | 出口压力 | ≥10MPa |
| Thinning ratio | 稀释比率 | 0-20% by volume(体积比) |
Brush/Roller 刷涂/滚涂 Thinning ratio 稀释比率 0-20% by volume(体积比)
| Thinner | Kanpe Flon Topcoat Thinner |
|---|---|
| 稀释剂 | 氟碳面漆稀释剂 |
| Drying time & | Temperature | 温度 | 5℃ | 20℃ | 30℃ |
| Overcoating interval | Surface dry | 指触干燥 | 1hr | 15mins | 10mins |
| 干燥时间&涂装间隔 | Touch dry | 半硬干燥 | 4hrs | 2hrs | 1hr |
| Min. interval | 最小涂装间隔 | 24hrs | 10hrs | ||
| Max. interval | 最大涂装间隔 | 7days | |||
| Typical undercoat | Kanpe Flon Undercoat or according to the coating system of COSCO Kansai. |
|---|---|
| 适用下涂 | 氟碳中间漆或参考中远关西涂装配套 |
Store in dry, cool condition and away from sources of heat and ignition. Containers
must be kept tightly closed.
贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。
| Shelf life | 12 months from date of production (25℃) |
|---|---|
| 贮存期限 | 自生产之日起12 个月(25℃) |
The information given on this sheet is to the best of our knowledge and accurate at the
time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非 我方所能控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司 产品及生产工艺的不断发展,本说明书的内容也会随时进行更改,此中所有信息 均以我方确认为主。产品使用前,请确认所持说明书为最新版本。
| Issued Date 发行日期 | 2020/05 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI FLON FINISH HS-50 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
