EPOTAINER EX EPOTAINER EX 环氧云铁厚浆漆EX（M 属环氧漆。environments and container surface of new construction and maintenance. Outdoor Corrosion Resistant suitable for UL 50E enclosures. 用于中等至严酷腐蚀环境的新建钢结构及集装箱表面，可作为底漆或中间漆使用。是一种低VOC 含量、高固体、双组份环氧厚浆涂料。本页参数：干膜厚度 75-200 微米/道、理论涂布率 0.020 千克/平方米/10 微米、组份数 双组份。
以上内容整理自原厂说明书与本站参数表；选型、配套与货期请联系我们确认。
| 体积固体份 | 75% |
|---|---|
| 干膜厚度 | 75-200 微米/道 |
| 理论涂布率 | 0.020 千克/平方米 /10 微米 |
| VOC | 278 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| 密度/比重 | — |
| 组份数 | 双组份 |
| 闪点 | 20℃以上 |
| 稀释剂 | 环氧稀释剂20# |
| 混合比 | Base/Hardener=9/1(by weight) |
| EPOTAINER EX(M) | 环氧云铁厚浆漆EX(M) |
|---|
A low VOC, high solids, two packs high build epoxy coating.
是一种低VOC 含量、高固体、双组份环氧厚浆涂料
As a primer or intermediate coat can be used in steel structure at moderately to severe corrosive
environments and container surface of new construction and maintenance. Outdoor Corrosion Resistant suitable for UL 50E enclosures.
用于中等至严酷腐蚀环境的新建钢结构及集装箱表面,可作为底漆或中间漆使用。也可在维修 配套中使用。可用作UL50E 外壳户外防腐。
UL50E certified
通过UL50E 认证
Low VOC, High volume solids
低VOC 含量,高固体份
Excellent anti-corrosive performance
极好的防腐性能
Excellent surface-tolerant properties
极好的表面适应性能
High-build applicability
极好的厚涂施工性能
Add MIO (Micaceous Iron Oxide),can be overcoated after extended periods
添加云铁成分,适应较长时间后覆涂
Lead free*, be friendly with health and environment
无铅,有益于健康和环境
*:Lead free is defined in order to comply with the request of JIS K 5674
*:无铅的概念为满足JIS K 5674 中对铅含量的要求
| Color | Grey |
|---|---|
| 颜色 Volume Solids | 灰色 |
| 体积固体份 | 75% |
| VOC | 278g/L,accord with EU Dircrtive2004/42/EC,subcategory j |
| 挥发性有机化合物含量 | 278 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别 |
| Flash Point | Greater than 20℃ |
| 闪点 | 20℃以上 |
| Film thickness | Dry : 75-200 μm/coat Wet : 100-270μm/coat |
| 涂装膜厚 | 干膜: 75-200 微米/道湿膜: 100-270 微米/道 |
| Theoretical Coverage | 0.020Kg/m2/10μm |
| 理论涂布率 | 0.020 千克/平方米/10 微米 |
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂覆率与表面处理,外界环境,施工方法等多种因素有关
| Application Temperature 施工温度 | 5℃-40℃ |
|---|---|
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator |
| 混合 | 混合主剂与固化剂,使用动力工具搅拌均匀 |
| Mixing Ratio | Base/Hardener=9/1(by weight) |
| 混合比例 | 主剂/固化剂=9/1(重量比) |
| Pot Life | 5℃ | 10℃ | 20℃ | 30℃ |
| 混合使用期 | 8hrs | 6hrs | 3hrs | |
| Application Methods | Airless spray, air spray brush and roller |
|---|---|
| 施工方法 | 无气喷涂、空气喷涂、刷涂和滚涂 Airless spray 无气喷涂 |
| Nozzle tip | 喷嘴尺寸 | 0.43mm-0.53mm |
| Nozzle pressure | 出口压力 | ≥15MPa |
| Thinner | Epomarine Thinner 20# |
|---|---|
| 稀释剂 | 环氧稀释剂20# |
| Drying time & | Temperature | 温度 | 5℃ | 10℃ | 20℃ | 30℃ |
| Overcoating interval | Surface dry | 指触干燥 | 5hrs | 4hrs | 3hrs | 2hrs |
| 干燥时间&涂装间隔 | Touch dry | 半硬干燥 | 48hrs | 24hrs | 16hrs | 12hrs |
| Min. interval | 最小涂装间隔 | 48hrs | 36hrs | 24hrs | 16hrs | |
| Max. interval | 最大涂装间隔 | 7days | ||||
| Applied Substrate | Bare steel, EPOTAINER Zinc 60 etc. |
|---|---|
| 适用底材 | 裸钢,环氧富锌底漆60 等 |
| Typical topcoat | PU Finish CT-50, or according to the coating system of COSCO Kansai. |
| 适用上涂 | 聚氨酯面漆CT-50 或参考中远关西涂装配套 |
Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept
tightly closed.
贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。
| Shelf life | 12 months from date of production (25℃) |
|---|---|
| 贮存期限 | 自生产之日起12 个月(25℃) |
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.
Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check this date sheet is current prior to using the product.
本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所能控 制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺的不断发 展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品使用前,请确 认所持说明书为最新版本。
| Issued Date | 2023/9 |
|---|
资料以厂商最新版为准，具体以原厂最新 TDS 为准。查看 关西 KANSAI EPOTAINER EX (M) EPOTAINER EX（M） 环氧云铁厚浆漆EX（M 原厂 PDF 说明书全文。
原厂包装规格与批次交期以实际供货为准，可联系我们按项目核算。
