← 返回关西 KANSAI品牌页

EPOMARINE AE-20 耐油导静电涂料

选型速览

EPOMARINE AE-20 耐油导静电涂料 属环氧漆。crude oil. The surface resistivity is 108-1011 ohms. 作为长效导静电防腐涂料,使用于装载原油的钢制储罐内壁。是一种添加导静电材料的双组份胺加成物固化型环氧涂料。本页参数:体积固体份 50 ± 2%、干膜厚度 40-80 微米/道、理论涂布率 0.216 千克/平方米/80 微米。同品牌同类可对比:EPOFEND AR 80 超强耐磨环氧厚浆漆、EPOFEND AR 耐磨环氧漆、EPOFEND MT-30 特种环氧漆MT-30。

以上内容整理自原厂说明书与本站参数表;选型、配套与货期请联系我们确认。

体积固体份50 ± 2%
干膜厚度40-80 微米/道
理论涂布率0.216 千克/平方米 /80 微米
VOC460 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
密度/比重—
组份数双组份
闪点24℃以上
稀释剂环氧稀释剂#20
混合比Base/Hardener=8/1(by weight)

按分类浏览同类型号本型号属于:环氧漆

EPOMARINE AE-20耐油导静电涂料

PRODUCT DESCRIPTION

A two pack amine adduct cured epoxy paint with conducting electrostatic materials.

产品简介

是一种添加导静电材料的双组份胺加成物固化型环氧涂料。

RECOMMENDED USE

As long-term conducting electrostatic anti-corrosive coating on steel tank of interior surface for

用途

crude oil. The surface resistivity is 108-1011 ohms.

作为长效导静电防腐涂料,使用于装载原油的钢制储罐内壁。表面电阻率为108-1011 欧姆。

COMPLIED STANDARDS

Complies with GB/T 13348-2009

符合标准

符合液体石油产品静电安全规程GB/T 13348-2009

FEATURES

Excellent corrosive resistance

产品特性

极好的防腐性能

a long-term stable conducting electrostatic properties

长效的导静电性能

Excellent osmosis resistance

优异的抗渗透性

Non-pollution for oil

对油品无污染

Light colors

浅色

PHYSICAL PROPERTIES

基本数据

ColorGrey and White
颜色灰色和白色
Volume Solids 体积固体份50±2 %
VOC460g/L,accord with EU Dircrtive2004/42/EC,subcategory j
挥发性有机化合物含量460 克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
Flash PointGreater than 24℃
闪点24℃以上
Film thicknessDry 40-80 microns/coat Wet : 80-160microns/coat
涂装膜厚干膜: 40-80 微米/道湿膜: 80-160 微米/道
Theoretical Coverage0.216Kg/m2/80 microns
理论涂覆率0.216 千克/平方米/80 微米

Practical coverage depending on surface conditions, environment, applications, etc.

实际涂覆率与表面处理, 外界环境, 施工方法等多种因素有关。

APPLICATION

施工

Application Temperature 施工温度5℃-40 ℃
MixingCombine Base with Hardener, mix thoroughly with power agitator
混合混合主剂与固化剂,使用动力工具搅拌均匀
Mixing RatioBase/Hardener=8/1(by weight)
混合比例主剂/固化剂=8/1(质量比)
Pot life10℃20℃30℃
混合使用期12hrs8hrs
Application MethodsAirless spray, air spray and roller
施工方法无气喷涂、空气喷涂、滚涂 Airless spray 无气喷涂
Nozzle tip喷嘴尺寸0.33mm-0.43mm
Nozzle pressure出口压力≥10Mpa
Thinning ratio稀释比率0-5% by volume(体积比)

Roller 滚涂

Thinning ratio 稀释比率 5-10% by volume(体积比)

ThinnerEpomarine Thinner #20
稀释剂环氧稀释剂#20
Drying time &Temperature温度10℃20℃30℃
Overcoating intervalSurface dry指触干燥6hrs4hrs2hrs
干燥时间&涂装间隔Touch dry半硬干燥30hrs24hrs16hrs
Min. interval最小涂装间隔30hrs24hrs16hrs
Max. interval最大涂装间隔7days
Applied substrateBare steel
适用底材裸钢
Typical topcoatEPOMARINE
适用上涂耐油导静电涂料

STORAGE

Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept

贮存

tightly closed.

贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。

Shelf life12 months from date of production (25℃)
贮存期限自生产之日起12 个月(25℃)

DISCLAIMER

The information given on this sheet is to the best of our knowledge and accurate at the time of

提请注意

issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.

本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所 能控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺 的不断发展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品 使用前,请确认所持说明书为最新版本。

Issued Date2011/6/27
发行日期2011/6/27

资料以厂商最新版为准,具体以原厂最新 TDS 为准。查看 关西 KANSAI EPOMARINE AE-20 耐油导静电涂料 原厂 PDF 说明书全文。

同品牌相近型号 · 环氧漆

查看 关西 KANSAI 全部型号

采购与资料

原厂包装规格与批次交期以实际供货为准,可联系我们按项目核算。