← 返回关西 KANSAI品牌页

EPOFEND MIO 30 环氧云铁漆MIO-30

选型速览

EPOFEND MIO 30 环氧云铁漆MIO-30 属中间漆。用于一般环境新建以及维修项目表面,仅可作为中间漆使用。是一种低VOC 含量、高固体、双组份厚浆型环氧涂料。本页参数:体积固体份 75 ± 2%、干膜厚度 75-125 微米/道、理论涂布率 0.210 千克/平方米/100 微米。同品牌同类可对比:EPOTAINER MIO 30 环氧内面漆MIO-30、EPOTECT MIO EX EPOTECT MIO EX 环氧云铁厚浆漆。

以上内容整理自原厂说明书与本站参数表;选型、配套与货期请联系我们确认。

体积固体份75 ± 2%
干膜厚度75-125 微米/道
理论涂布率0.210 千克/平方米 /100 微米
VOC277/克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
密度/比重—
组份数双组份
闪点23℃以上
稀释剂环氧稀释剂
混合比Base/Hardener=10/1(by weight)

按分类浏览同类型号本型号属于:中间漆

EPOFEND MIO-30环氧云铁漆MIO-30

PRODUCT DESCRIPTION

A low VOC, high solids, two pack high build epoxy coating

产品简介

是一种低VOC 含量、高固体、双组份厚浆型环氧涂料。

RECOMMENDED USE

Only as a intermediate coat can be used in new construction and maintenance. Can be used for

用途

bridges, plant, engineering machinery etc..。

用于一般环境新建以及维修项目表面,仅可作为中间漆使用。可用于桥梁、厂房钢结构、机 械设备等。

COMPLIED STANDARDS

Complies with HG/T 4340-2012

符合标准

符合HG/T 4340-2012,《环氧云铁中间漆》标准

FEATURES

Low VOC, high volume solids

产品特性

低VOC 含量,高固体份

High-build applicability

极好的厚涂施工性能

Only as a intermediate coat must be apply with zinc rich primer of cosco kansai

仅作为中间漆,必须与我司富锌漆配套使用

Add MIO .(Micaceous Iron Oxide)

添加云铁成分

PHYSICAL PROPERTIES

基本数据

ColorGrey
颜色灰色
Volume Solids 体积固体份75±2%
VOC277g/L,accord with EU Dircrtive2004/42/EC,subcategory j
挥发性有机化合物含量277/克/升,符合欧盟溶剂排放指令2004/42/EC,j 子类别
Flash PointGreater than 23℃
闪点23℃以上
Film thicknessDry : 75-125 μm/coat Wet : 100-167μm/coat
涂装膜厚干膜: 75-125 微米/道湿膜: 100-167 微米/道
Theoretical Coverage0.210Kg/m2/100 microns
理论涂覆率0.210 千克/平方米/100 微米

Practical coverage depending on surface conditions, environment, applications, etc.

实际涂覆率与表面处理, 外界环境, 施工方法等多种因素有关。

APPLICATION

施工

Application Temperature 施工温度5℃-40℃
MixingCombine Base with Hardener, mix thoroughly with power agitator
混合混合主剂与固化剂,使用动力工具搅拌均匀
Mixing RatioBase/Hardener=10/1(by weight)
混合比例主剂/固化剂=10/1(质量比)
Pot life5℃10℃20℃30℃
混合使用期6hrs4hrs
Application MethodsAirless spray, air spray, brush and roller
施工方法无气喷涂、空气喷涂、刷涂和滚涂 Airless spray 无气喷涂
Nozzle tip喷嘴尺寸0.43mm-0.53mm
Nozzle pressure出口压力≥15Mpa
ThinnerEpomarine Thinner
稀释剂环氧稀释剂
Drying time &Temperature温度5℃10℃20℃30℃
Overcoating intervalSurface dry指触干燥5hrs4hrs2hrs1.5hrs
干燥时间&涂装间隔Touch dry半硬干燥48hrs24hrs16hrs12hrs
Min. interval最小涂装间隔48hrs36hrs16hrs12hrs
Max. interval最大涂装间隔7days
Typical undercoatSD Zinc 500, Epofend Zinc 60 etc.
适用下涂环氧富锌涂料500,环氧富锌60 等
Typical topcoatRetan 6000, Kanpe Flon HD or according to the coating system of Cosco Kansai.
适用上涂聚氨酯面漆6000,氟碳面漆或参考我司涂装配套

STORAGE

Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept

贮存

tightly closed.

贮存于干燥阴凉的环境中,远离热源及火源。包装桶必须保持封闭。

Shelf life12 months from date of production (25℃)
贮存期限自生产之日起12 个月(25℃)

DISCLAIMER

The information given on this sheet is to the best of our knowledge and accurate at the time of

提请注意

issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product.

本说明书所提供信息均为目前我方所掌握最全面正确的资料,鉴于产品使用条件非我方所能 控制,此中信息不含担保,即仅在选取产品上对买方负责。由于我公司产品及生产工艺的不 断发展,本说明书的内容也会随时进行更改,此中所有信息均以我方确认为主。产品使用前, 请确认所持说明书为最新版本。

Issued Date 发行日期2024/11

资料以厂商最新版为准,具体以原厂最新 TDS 为准。查看 关西 KANSAI EPOFEND MIO 30 环氧云铁漆MIO-30 原厂 PDF 说明书全文。

同品牌相近型号 · 中间漆

查看 关西 KANSAI 全部型号

采购与资料

原厂包装规格与批次交期以实际供货为准,可联系我们按项目核算。